6 BASIC INSTRUCTIONS
6.4 Data Transfer Instructions
315
6
• The following program exchanges the present value of T0 with the contents of D0 when X8 goes ON.
• The following program exchanges the contents of D0 with the data from M16 to M31 when X10 goes ON.
• The following program exchanges the contents of D0 and D1 with the data at M16 to M47 when X10 goes ON.
• The following program exchanges the contents of D0 and D1 with those of D9 and D10 when M0 goes ON.
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
Step
Instruction
Device
To Next Page
Loading...
