330
6 BASIC INSTRUCTIONS
6.6 Program Execution Control Instructions
• In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.
• The following program creates an execution enabled state for the interrupt program marked by the interrupt pointer number
when X0 is ON.
Error
code
Error details Q00J/
Q00/
Q01
QnH QnPH QnPRH QnU LCPU
4101 The device specified in (S) exceeds the range of the corresponding device.
[Ladder Mode] [List Mode]
To Next Page
Loading...
