Mitsubishi Electric MELSEC-Q/L - Page 402

400
7 APPLICATION INSTRUCTIONS
7.3 Shift Instructions
Operation error
• In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.
Program example
• The following program shifts the contents of D683 to D689 to the right when XB is turned ON.
• The following program shifts the contents of D683 to D689 to the left when XB is turned ON.
Error
code
Error details Q00J/
Q00/
Q01
QnH QnPH QnPRH QnU LCPU
4101 The points specified in n exceed those of the corresponding device specified
in (D).

[Ladder Mode] [List Mode]
[Operation]
[Ladder Mode] [List Mode]
[Operation]
Step Instruction Device
D686
D686D689 D688 D687 D685 D684 D683
D689 D688 D687 D685 D684 D683
503 600 3802
5003
0 503 600 3802
Filled with 0.
Designation range for the DSFRP instruction
-32765-336-100
-100 -336
-32765
Step Instruction Device
D686
D686D689 D688 D687 D685 D684 D683
D689 D688 D687 D685 D684 D683
-100 503 600 -336 3802 -32765 5003
503 600 -336 3802 -32765 5003 0
Filled with 0.
Designation range for the DSFLP instruction