478
7 APPLICATION INSTRUCTIONS
7.6 Structure Creation Instructions
• The EFCALL (P) instruction is used in combination with the ECALL (P) instruction.
• If the EFCALL(P) instruction is used in conjunction with the ECALL(P) instruction, non-execution processing of a subroutine
program is performed when the execution command is turned OFF, enabling forcible turning OFF of the OUT instruction
and the PLS instruction (including P instructions). In case the EFCALL(P) instruction is not used in conjunction with the
ECALL(P) instruction, non-execution processing of a subroutine program is not performed even if the execution command
is turned OFF. Therefore, output status of the individual coil instructions remains unchanged.
• Only the file name of a program file stored in the drive 0 (program memory/internal RAM) can be designated for a file name.
• It is not necessary to designate the extension (.QPG) with the file name. (Only .QPG files will be acted on.)
[File Name: ABC.QPG]
[File Name: ABC.QPG]
When EFCALL instruction is used
Forced OFF by FCALL instruction
When EFCALL instruction is not used
To Next Page
Loading...
