480
7 APPLICATION INSTRUCTIONS
7.6 Structure Creation Instructions
• In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.
• The following program executes a subroutine program with argument when X0 is ON, and forces non-execution processing
when X20 is turned from ON to OFF.
Error
code
Error details Q00J/
Q00/
Q01
QnH QnPH QnPRH QnU LCPU
2411 The specified file cannot be executed.
4101 The device specified for the argument cannot be secured for the data size.
4210 The subroutine program of the pointer specified by the ECALL (P) instruction
does not exist. The specified file does not exist.
4211 After the EFCALL (P) instruction was executed, the END, FEND, GOEND, or
STOP instruction was executed prior to the RET instruction.
4212 The RET instruction was executed prior to the EFCALL (P) instruction.
4213 The 17th nesting level is executed.
[Ladder Mode] [List Mode]
Step
Instruction
Device
To Next Page
Loading...
