Mitsubishi Electric MELSEC-Q/L - Page 675

7 APPLICATION INSTRUCTIONS
7.13 Data Control Instructions
673
7
Program example
• The following program executes scaling for the scaling conversion data of which the devices specified at D100 and up are
set with the input value specified at D0, and then outputs the data at D20.
[Ladder Mode] [List Mode]
[Operation]
Step Instruction Device
D100 K5
D101
K5
D102
K13
D103
K10
D104
K15
D105
K17
D106
K13
D107
K20
D108
K8
D109
K25
D110 K22
Y
X
D0=18
(20, 8)
(25, 22)
(17, 13)
(10, 15)
(5, 13)
Scaling conversion data component
Setting item Device Setting contents
Number of coordinate points
Point 1 X coordinate
Y coordinate
Point 2 X coordinate
Y coordinate
Point 4 X coordinate
Y coordinate
Point 3 X coordinate
Y coordinate
Point 5 X coordinate
Y coordinate
Point 1
Point 2
Point 3
Point 5
Point 4
(Output value)
(Input value)
D20=11