700
7 APPLICATION INSTRUCTIONS
7.15 Clock Instructions
• The following program compares the data stored in D0 with the data (year, month, and day) stored in D10, and makes Y33
be conductive status when the data stored in D0 meet the data stored in D10.
• The following program compares the data stored in D0 with the current date data (year and month), and makes Y33 be
conductive status when the data stored in D0 do not meet the current date data, when M0 is turned on.
• The following program compares the data stored in D0 with the data (year and day) stored in D10, and makes Y33 be
conductive status when the data value stored in D10 is smaller than the data value stored in D0, when M0 is turned on.
• The following program compares the data stored in D0 with the current date data (year), and makes Y33 be conductive
status when the value of the current date data is the data value stored in D0 or larger.
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
Step
Instruction
Device
Step
Instruction
Device
To Next Page
Loading...
