76
2 INSTRUCTION TABLES
2.5 Application Instructions
Writing data
to the
designated
file
SP.FWRITE • Writes data to the designated file. 11 Page 779
Reading
data from
designated
file
SP.FREAD • Reads data from the designated
file.
11 Page 789
Writing data
to standard
ROM
SP.DEVST • Writes data to the device data
storage file in the standard ROM.
9 Page 801
Reading
data from
standard
ROM
S.DEVLD • Reads data from the device data
storage file in the standard ROM.
8 Page 803
SP.DEVLD
Loading
program
from
memory
PLOADP • Transfers the program stored in a
memory card or standard memory
(other than drive 0) to drive 0 and
places the program in standby
status.
3 Page 805
Unloading
program
from
program
memory
PUNLOADP • Deletes the standby program
stored in standard memory (drive
0).
3 Page 808
Loading +
Unload
PSWAPP • Deletes standby program stored in
standard memory (drive 0)
designated by (S1). Then,
transfers the program stored in a
memory card or standard memory
(other than drive 0) designated by
(S2) to drive 0 and places it in
standby status.
4 Page 810
High-speed
block
transfer of
file register
RBMOV • Transfers n points of 16-bit data
from the device designated by (S)
to the devices of n points starting
from the one designated by (D).
4 Page 812
RBMOVP
User
message
UMSG • Displays the specified character
strings on the display unit as a
user message.
2 Page 817
Category Instruction
symbol
Symbol Processing details Execution
condition
Number
of basic
steps
Subset Reference
SP.FWRITE S1 S2S0 D0 D1U0
S.DEVLDn1 n2D
PLOADP SD
To Next Page
Loading...
