7 APPLICATION INSTRUCTIONS
7.19 Other Instructions
799
7
• The following program reads 4 bytes of binary data from the beginning of file "ABCD.BIN" in the memory card inserted to
drive 2 when X10 is turned ON.
• Assume that 8 points from (D0) are reserved for the control data devices.
• Assume that 100 bytes from D20 are reserved for the reading devices.
[Ladder Mode]
[List Mode]
Sets the file name
Normal completion display
Sets the execution/completion type
Sets the number of request read data
Sets the file position
Error completion display
To Next Page
Loading...
