7 APPLICATION INSTRUCTIONS
7.19 Other Instructions
813
7
Transfer ranges of ZR and R overlap when transferring 10000 points of data from ZR30000 (source) to R10 (block No.1 of the
destination).
Therefore, the range 32778 to 39999 overlaps.
• When (S) is a word device and (D) is a bit device, the number of bits designated by the bit device digit specification will be
transferred. If K1Y30 has been designated by (D), the lower four bits of the word device designated by (S) will become the
object.
• The RBMOV (P) instruction is useful to batch transfer a large quantity of file register data with the QnHCPU/QnPHCPU/
QnPRHCPU. For the QnUCPU, the processing speed of the RBMOV instruction is equivalent to that of the BMOV
instruction. The comparison of processing speed between the RBMOV and BMOV instructions is as follows:
• ZR transfer range (30000) to (30000+10000-1) (30000) to (39999)
• R transfer range (10+(1 32768)) to (10+(1 32768)+10000-1) (32778) to (42777)
ZR0 R0
R10
R32767
R10009
ZR30000
ZR39999
Source of transfer Destination of transfer
Overlapped
Block No. 0
Block No. 1
n
001110111 110
Y30Y33Y37 Y34Y3B Y38
+1+2
R100 1011
b0b1b2b3b4b15
R101 0011+1
R102
0111+2
n
S
D
S
S
D D
To Next Page
Loading...
