Mitsubishi Electric MELSEC-Q/L - Page 896

894
APPENDICES
Appendix 1 Operation Processing Time
*1 The FROM/TO instruction differs in processing time according to the number of slots and the loaded modules. (The CPU also differs in
processing time according to the extension base type.)
■Data link instruction
The processing time when the instruction is not executed is calculated as follows:
• Q00JCPU: 0.20  (No. of steps for each instruction + 1) s
• Q00CPU: 0.16  (No. of steps for each instruction + 1) s
• Q01CPU: 0.10  (No. of steps for each instruction + 1) s
■Processing time for QCPU instructions (QCPU instructions only)
■Instructions executable by the product with the first five digits of the serial No. "04122" or
higher
DATERD
DATERDP
 30 25 23
DATEWR
DATEWRP
 69 57 54
DATE+
DATE+P
No digit increase 47 39 36
Digit increase 50 42 38
DATE-
DATE - P
No digit increase 47 40 36
Digit increase 50 42 38
SECOND
SECONDP
 28 24 22
HOUR
HOURP
 38 32 29
WDT
WDTP
 18 15 14
DUTY  41 36 32
ZRRDB
ZRRDBP
24 22
ZRWRB
ZRWRBP
27 24
ADRSET
ADRSETP
 23 19 18
ZPUSH
ZPUSHP
 38 33 30
ZPOP
ZPOPP
 37 31 29
Instruction Condition (device) Processing time (s)
Q00JCPU Q00CPU Q01CPU
ZCOM  105 82 80
Instruction Condition (device) Processing time (s)
Q00JCPU Q00CPU Q01CPU
UNIRD
UNIRDP
n=1 96 80 74
n=16 440 370 340
Instruction Condition (device) Processing time (s)
Q00JCPU Q00CPU Q01CPU
LDE= Single
precision
In conductive status 43.0 35.5 33.0
In non-conductive status 46.0 38.0 35.5
ANDE= Single
precision
When not executed 1.5 1.2 1.0
When
executed
In conductive status 35.5 29.5 26.5
In non-conductive
status
42.0 35.0 32.5
Instruction Condition (device) Processing time (s)
Q00JCPU Q00CPU Q01CPU