Mitsubishi Electric MELSEC-Q/L - Page 938

936
APPENDICES
Appendix 1 Operation Processing Time
• When using Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU, and Q26UDVCPU
Category Instruction Condition (device) Processing time (s)
Q03UDVCPU Q04UDVCPU Q06UDVCPU,
Q13UDVCPU,
Q26UDVCPU
Min. Max. Min. Max. Min. Max.
Sequence
instruction
LD
LDI
AND
ANI
OR
ORI
When executed 0.0019 0.0078 0.0019 0.0078 0.0019 0.0078
LDP
LDF
ANDP
ANDF
ORP
ORF
When executed 0.0058 0.015 0.0058 0.015 0.0058 0.015
LDPI
LDFI
When executed 0.0058 0.015 0.0058 0.015 0.0058 0.015
ANDPI
ANDFI
ORPI
ORFI
When executed 0.0058 0.015 0.0058 0.015 0.0058 0.015
OUT When not changed 0.0039 0.0078 0.0039 0.0078 0.0039 0.0078
When changed 0.0039 0.0078 0.0039 0.0078 0.0039 0.0078
SET
RST
When not executed 0.0039 0.0078 0.0039 0.0078 0.0039 0.0078
When
executed
When not changed 0.0039 0.0078 0.0039 0.0078 0.0039 0.0078
When changed 0.0039 0.0078 0.0039 0.0078 0.0039 0.0078
Basic
instruction
LD= In conductive status 0.0098 0.023 0.0098 0.023 0.0098 0.023
In non-conductive status 0.0098 0.023 0.0098 0.023 0.0098 0.023
AND= When not executed 0.0078 0.023 0.0078 0.023 0.0078 0.023
When
executed
In conductive status 0.0098 0.023 0.0098 0.023 0.0098 0.023
In non-conductive
status
0.0098 0.023 0.0098 0.023 0.0098 0.023
OR= When not executed 0.0078 0.023 0.0078 0.023 0.0078 0.023
When
executed
In conductive status 0.0098 0.023 0.0098 0.023 0.0098 0.023
In non-conductive
status
0.0098 0.023 0.0098 0.023 0.0098 0.023
LD<> In conductive status 0.0098 0.023 0.0098 0.023 0.0098 0.023
In non-conductive status 0.0098 0.023 0.0098 0.023 0.0098 0.023
AND<> When not executed 0.0078 0.023 0.0078 0.023 0.0078 0.023
When
executed
In conductive status 0.0098 0.023 0.0098 0.023 0.0098 0.023
In non-conductive
status
0.0098 0.023 0.0098 0.023 0.0098 0.023
OR<> When not executed 0.0078 0.023 0.0078 0.023 0.0078 0.023
When
executed
In conductive status 0.0098 0.023 0.0098 0.023 0.0098 0.023
In non-conductive
status
0.0098 0.023 0.0098 0.023 0.0098 0.023