Operating the unit
23Operating instructions
4 Operating the unit
ATTENTION
Risk of physical damage from fouling
• Keep the touchscreen free of unusually heavy fouling.
• Mop up any drips immediately.
4.1 Switching the unit on and off
4.1.1 Switching on
The power-on process for the touchscreen is around 45
seconds.
Requirement Emergency off deactivated
Touchscreen switched off
Switch the "ON OFF" button to "ON".
The unit is on.
The control system starts the power-on process automatically.
The progress bar at the lower edge of the touchscreen displays
the status of the process.
The main menu appears and the unit is ready for use.
4.1.2 Switching off
Requirement Touchscreen switched on
Switch the "ON OFF" button to "OFF".
The touchscreen is switched off.
The unit is off.
Switching the unit off only deactivates the unit control system.
The unit is not disconnected from the power supply.
4426201-20ABBE-A
To Next Page
Loading...
