MKN FlexiChef - Using Zone Frying

Operating the unit
72 Operating instructions
3. Tap the "Start" button in the information bar.
The pan heats up.
The "Start" button is replaced with the "Stop" button.
The cooking time is updated in the Cooking mode window.
Delta-T cooking has started.
Ending Delta-T cooking
Requirement Delta-T cooking has started
Cooking time has not elapsed
1. Tap the "Stop" button in the information bar.
or
2. Wait for the cooking time to end.
The heating of the pan is ended.
The "Stop" button is replaced with the "Start" button.
The cooking time is reset.
3. Open the lid completely.
Delta-T cooking has ended.
4.6.10 Using zone frying
c
d
e
f
b
a
Image: Zone frying mode
a "Start" button d Cooking temperature field
b
Cooking mode window e Cooking time field
c
Start/Stop field f Level field
Tap the "Start" button in the information bar to start the cooking
mode. The individual zones are pre-heated to the set temperature.
Tap the "Stop" button in the information bar to end the cooking mode.
Use the
Start/Stop field for the timers to start and end the timers for
each zone.
4426201-20ABBE-A