Operating the unit
82 Operating instructions
Ending information
Requirement Information has started
1. Tap the "Stop" button in the information bar.
or
In the case of "Continue automatically" control: if the "Pause"
field is tapped within 30 seconds, information must be ended
manually by tapping the "Continue" field.
2. In the case of "Continue automatically" control: the cooking
program is continued automatically after 30 seconds.
or
3. In the case of "Continue manually" control: tap the
Confirm
button
in the
Information
window.
4. Tap the "Continue" field in the
Information
window.
Information ends.
The "Stop" button is replaced with the "Start" button.
Information has ended.
4.7 User's own cooking programs
The
Manual cooking
menu provides cooking modes, equipment
functions and information which can be used to create your own
cooking programs. A cooking program can comprise any number of
steps which proceed automatically as far as possible in line with the
desired cooking process.
The following components are available as a cooking program step:
Type Step
Cooking mode • Pressure cooking (optional)
• Soft cooking
• Cooking
• Frying
• Deep frying (optional)
• Regeneration
• Delta-T cooking
• Zone frying
• Zone cooking
Equipment function • Lid
• Pan
• Water inlet
• Drain
Information • Information
4426201-20ABBE-A
To Next Page
Loading...
