Operating the unit
41Operating instructions
During a cooking program, all that appears is a prompt to tilt or
tilt back the pan. The equipment functions can be reached via
the
blue
tab.
The pan is automatically tilted back into the operating position
as soon as a cooking program is started.
Tilting the pan
Requirement Pan not in end position
Lid fully open
Equipment function
menu displayed
1. Tap the "Pan" field.
Actuate
window is displayed.
2. Tap and hold the
Arrow
symbol.
A signal sounds.
The pan is tilted.
The process stops as soon as the
Arrow
symbol is released or
when the pan has reached the end position.
The "Total" water meter in the water inlet equipment function is
reset to zero as soon as the pan reaches the end position.
Tilting back the pan
Requirement Pan tilted
Lid fully open
Equipment function
menu displayed
1. Tap the "Pan" field.
Actuate
window is displayed.
2. Tap the
Arrow
symbol.
A signal sounds.
The pan is tilted back.
The
Arrow
symbol disappears and the "Stop" button is
displayed.
The process can be interrupted at any time by tapping the
"Stop" button. The process ends automatically once the pan
reaches the operating position.
3. Wait for the pan to reach the operating position.
Pan is in the operating position.
4426201-20ABBE-A
To Next Page
Loading...
