Operating the unit
77Operating instructions
2. Configure the settings.
The
Cooking mode
window shows the configured settings.
3. Load in the food to be cooked.
4. Tap the "Start" button in the information bar.
The pan heats up.
The "Start" button is replaced with the "Stop" button.
5. Tap the "Continue" field.
The
Timer
windows are displayed.
6. Adjust the cooking time on the timers if necessary by tapping the
relevant
Timer
field.
7. Wait for the zone to reach the cooking temperature.
The
Operating temperature
display for the zone turns orange.
8. Load in the food to be cooked.
9. If possible, close the lid.
10.Tap the
Start/Stop
field for the timers.
The zone timer starts.
The
Start/Stop
field turns red and displays "Stop".
Zone cooking has started.
All timers can be started independently of each other. Cooking
can be carried out in the whole pan without starting the timers.
In zones where cooking has started, the actual temperature of
the water can be displayed by tapping the Cooking temperature
field.
Stopping timers
Requirement Zone cooking has started
Tap the
Start/Stop
field for the timer that has started.
The cooking time on the timer is reset.
The
Start/Stop
field turns green and displays "Start".
The pan continues to heat.
The zone timer is stopped.
To continue cooking in the zone, the timer can be restarted at
any time.
4426201-20ABBE-A
To Next Page
Loading...
