MKN FlexiChef - Page 86

Operating the unit
86 Operating instructions
5. Tap the Confirm button.
The Keypad menu closes.
The name of the cooking program is displayed in the Save
window.
6. Tap the "Category" field.
The Category menu is displayed.
7. Tap the field with the desired category.
The category is set.
The Category menu closes.
The category is displayed in the Save window.
The "Save" button is activated.
8. Configure additional storage settings as necessary.
9. Tap the "Save" button in the
Save window.
The cooking program is saved.
The Confirm window is displayed.
10.Tap the
Confirm button.
The green tab closes.
The cooking program is saved.
Selecting a subcategory
Requirement
Save window displayed
Required storage settings configured
1. Tap the "Subcategory" field.
The Subcategory menu is displayed.
2. Tap the field with the desired subcategory.
The subcategory is set.
The Subcategory menu closes.
The subcategory is displayed in the Save window.
Assigning an image
Requirement
Save window displayed
Required storage settings configured
1. Tap the "Image" field.
The Image menu is displayed.
2. Tap the "Images in the unit" button or the "Images on USB flash
drive" button.
The Image menu is updated.
3. Tap the desired image.
Image is set.
The Image menu closes.
The name of the image is displayed in the Save window.
4426201-20ABBE-A