Moeller DF51 - Optional Modules; Keypad DEX-KEY-6; Equipment Supplied

10/05 AWB8230-1541GB
Optional modules
195
Optional modules
Keypad DEX-KEY-6…
The optional keypad DEX-KEY-6… is available in two versions:
• DEX-KEY-6, with reference value potentiometer;
• DEX-KEY-61, without reference value potentiometer.
These keypads provide access to all inverter parameters and
therefore allow user-specific adjustment of the settings of
frequency inverters DF51, DV51, DF6 and DV6.
LEDs and a four-digit digital display indicate the operating status,
operational data and parameter values. With the pushbuttons, you
can change the parameter values and control frequency inverter
operation (Start/Stop). The frequency setpoint value can be
adjusted with the potentiometer (DEX-KEY-6 only).
Type code
Type codes and part numbers of keypads DEX-KEY-6…:
Equipment supplied
Open the packaging with suitable tools and inspect the contents
immediately after delivery to ensure that they are complete and
undamaged. The package should contain the following items:
• One keypad DEX-KEY-6 or DEX-KEY-61
• The mounting instructions AWA8240-2148
• One RJ 45 plug-in adapter (DEX-CON-RJ45)
h
The DEX-KEY-6… keypads are not included with the
frequency inverter.
Figure 161:Key to part numbers, keypads DEX-KEY-6…
DEX- KEY - 6 x
1 = without reference value potentiometer
6 = menu for device series DF51, DV51, DF6 and DV6
Keypad
Drive Extention (X = for various component series)
accessories
Figure 162:Equipment supplied, keypad DEX-KEY-6…
DEX-KEY-6
or
CON-RJ45
DEX-KEY-61
Hz
A
RUN
POWER
ALARM
PRG
I
O
PRG
ENTER
Hz
A
RUN
POWER
ALARM
PRG
I
O
PRG
ENTER