Configuration and Troubleshooting
2-16 Manual # 42-02-2P26
System Inputs On/Off status of dedicated inputs.
System
Outputs
On/Off status of dedicated outputs.
Programmed
Inputs
On/Off status of programmable inputs.
Programmed
Outputs
On/Off status of programmable outputs.
Main CPI IO’s On/Off status of CPI inputs/outputs
Aux CPI IO’s On/Off status of CPI inputs/outputs
Motion IO Groups indicators for the inputs and outputs active during car motion.
Event Log First In, First Out record of the last 200 events, time and date stamped. Col-
ors: Blue = informational; Yellow = fault; Red = Error; Gray = No longer
active.
Door Control On/Off status of door control inputs/outputs.
Diagnostics
Tree
Indicators for selected PLD functions. See page 2-32
Landing
System
On/Off status of landing system inputs/outputs.
Active Events Displays currently active system faults.
SPA Flags Indicators for car operation activity.
SPA Numeric Data register information for factory assisted diagnosis.
SPA Motion
Numeric
Data register information for factory assisted diagnosis.
Emergency
Pwr & EQ
Indicators related to emergency power and earthquake operation.
Door Dwell
Times
Indicators for active dwell timers.
Itinerary
Manager
Indicators for active car operation signals.
SPB Flags Indicators for motion activity.
SPB Numeric Data register information for factory assisted diagnosis.
SPB Inputs Indicators for motion related inputs
SPB Outputs Indicators for motion related outputs.
SPC Flags Indicators for USB, Ethernet, and SD card activity.
SPC Numeric Data register information for factory assisted diagnosis.
SPC Inputs Indicators for communications related inputs.
SPC Outputs Indicators for communications related outputs.
Group to Car
Data
Group to car data monitoring
Car to Group
Data
Car to group data monitoring
Table 2.1 Touchscreen Organization and Content
Tab Subtab Description
To Next Page
Loading...
Need help?
General
