Moxa Technologies ioThinx 4510 Series - Page 56

ioThinx 4510 Series Software Tools
4-34
SNMP
In the SNMP page, settings are divided into three tabs: SNMP, SNMP Trap/Inform, and Event Settings.
SNMP Settings
Version: Select one of the SNMP version options (option: v1 and v2c, v3 only, or v1 and v2c and v3),
through which the SNMP Manager can access the SNMP agent of the device.
Contact: Type the contact of the SNMP server (max length = 30).
Location: Type the physical location of the SNMP server (max length = 30).
INFORMATION
Enable/disable this service through
Security  Service Settings.