Moxa Technologies ioThinx 4510 Series - Page 57

ioThinx 4510 Series Software Tools
4-35
SNMPv1, SNMPv2c Settings
Read Community: Type the community string matching for read authentication (max length = 30, default
= "public").
Write Community: Type the community string matching for write authentication (max length = 30, default
= "private").
SNMPv3 Settings – Read Only
Username: Type the username for SNMP v3 settings (min. length = 1; max length = 30; A to Z, a to z, 0
to 9, symbols, spaces and .()[]{}/\'"@;: symbols are not allowed, default = "v3ro").
Authentication Protocol: Select Disable, MD5, SHA1, SHA-224, or SHA-256 for the authentication
protocol setting (default: MD5).
Authentication Password: Type the password for the authentication password settings (min. length = 8;
max length = 16; A to Z, a to z, 0 to 9, symbols, at least one symbol and one number, spaces
and .()[]{}/\'"@;: symbols are not allowed, default = "moxa-123").
Privacy Protocol: Select Disable, CBC-DES, or AES-128 for privacy protocol setting (default: CBC-DES).
Privacy Password: Type the password for the privacy password settings (min. length = 8; max length =
16; A to Z, a to z, 0 to 9, symbols, at least one symbol and one number, spaces and .()[]{}/\'"@;: symbols
are not allowed, default = "moxa-123").