ioThinx 4510 Series Software Tools
SNMPv3 Settings – Read/Write
Username: Type the username for the SNMP v3 settings (min. length = 1; max length = 30; A to Z, a to z,
0 to 9, symbols, spaces and .()[]{}/\'"@;: symbols are not allowed, default = "v3rw").
Authentication Protocol: Select Disable, MD5, SHA1, SHA-224, or SHA-256 for the authentication
protocol settings (default: MD5).
Authentication Password: Type the password for the authentication password settings (min. length = 8;
max length = 16; A to Z, a to z, 0 to 9, symbols, at least one symbol and one number, spaces
and .()[]{}/\'"@;: symbols are not allowed, default = "moxa-123").
Privacy Protocol: Select Disable, CBC-DES, or AES-128 for privacy protocol settings (default: CBC-DES).
Privacy Password: Type the password for the privacy password settings (min. length = 8; max length =
16; A to Z, a to z, 0 to 9, symbols, at least one symbol and one number, spaces and .()[]{}/\'"@;: symbols
are not allowed, default = "moxa-123").
SNMP Rules for detailed SNMP OID information.
SNMP Trap and SNMP Inform
SNMP Trap: Select one of the SNMP version options (option: v1, v2c, or v3), through which the SNMP
server can receive the SNMP Trap from the SNMP agent.
SNMP Inform: Select one of the SNMP version options (option: v2c or v3), through which the SNMP server
can receive the SNMP Inform from the SNMP agent.
IP: Type the IP address of the SNMP server.
If the IP is 0.0.0.0, the ioThinx 4510 will not update the SNMP Trap/Inform to the server.
Port: Enter the port of the SNMP server(default = 162).
To Next Page
Loading...
Need help?
General
