Moxa Technologies NPort W2150Plus Series - System Log Settings

NPort W2150/2250 Plus Series User’s Manual Web Console: System Management
8-9
RADIUS Server IP
Default
Options
IP address (e.g., “192.168.2.2”)
Description
This field specifies the IP address of the RADIUS server.
RADIUS Key
Default
Options
free text (e.g., “authenticate123”)
Description
This field specifies the password that is used by the RADIUS server.
UDP Port
Default
1645
Options
1645, 1812
Description
This field specifies the UDP port assignment used by the RADIUS server.
RADIUS Accounting
Default
Disable
Options
Enable, Disable
Description
This field specifies if RADIUS accounting will be used.
System Management> Misc. Network Settings>
System Log Settings
The System Log page is located under Misc. Network Settings in the System Management
folder. This is where you select the type of events that will be logged by the NPort.