NPort W2150/2250 Plus Series User’s Manual Web Console: System Management
8-18
System Management> Maintenance> Change
Password
The Change Password page is located under Maintenance in the System Management folder.
To change the password, first enter the old password in the Old password field. Leave this blank
if the NPort is not currently password-protected. Enter the new password twice, once in the New
password field and once in the Confirm password. Leave these fields blank to remove password
protection.
ATTENTION
If you forget the password, the ONLY way to configure the NPort is by loading the factory
defaults with the reset button. All settings will be lost.
Before setting the password, you may want to first export the configuration to a file. Your
configuration can then be easily imported back into the NPort if necessary.
To Next Page
Loading...
Need help?
General
