NPort W2150/2250 Plus Series User’s Manual Web Console: Save and Restart
10-2
Overview
This chapter explains how to use save your configuration changes and restart the NPort using the
NPort web console. Configuration changes will not be effective until they are saved and the NPort
is rebooted.
Save Configuration
Go to the Save Configuration page in order to save all configuration changes to the NPort. The
new settings will be effective when the NPort is restarted. If you restart or power off the NPort
without saving the configuration, any changes will be discarded.
Restart> Restart System
The Restart System page is located in the Restart folder. Click [Restart] to restart the NPort.
Before restarting, be sure to save the configuration so the new settings will take effect upon restart.
Configuration changes that have not been saved will be discarded when the NPort is restarted.
To Next Page
Loading...
