NPort W2150/2250 Plus Series User’s Manual Introduction
1-3
Product Features
y Instant connection of any serial device to IEEE 802.11a/b/g network
y RS-232/422/485 ports supporting baudrates up to 921.6 Kbps
y Web-based configuration over Ethernet or WLAN
y Enhanced remote configuration with HTTPS, SSH
y Secure data access with WEP, WPA, WPA2
y Built-in WLAN site survey Tool
y User-defined behavior for wireless roaming with signal strength thresholds
y Off-line port buffering and serial data log for each serial port
y Dual power inputs (1 power jack, 1 terminal block)
Product Specifications
WLAN
Standard Compliance
802.11a/b/g
Radio Frequency Type
DSSS/OFDM
Tx Power
17 dBm (typical) for Tx Power 11b
15 dBm (typical) for Tx Power 11g
14 dBm (typical) for Tx Power 11a
Rx Sensitivity
-80 dBm
Transmission Rate
54 Mbps for 802.11a
11 Mbps for 802.11b
54 Mbps for 802.11g
54 Mbps (max.) with auto fallback
(54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps)
Transmission Distance
Up to 100 meters (in open areas)
Antenna Connector
Reverse SMA
Network Mode
Infrastructure mode, Ad-Hoc mode
Wireless Security
WEP: 64-bit/128-bit data encryption
WPA, WPA2, 802.11i: Enterprise mode and Pre-Share Key (PSK)
mode
Encryption: 128-bit TKIP/CCMP
802.11i WAP authentication: PEAP, EAP-TLS, EAP-TTLS,
PEAP/MSCHAPv2, PEAP/TLS, PEAP/GTC, ,PEAP/MD5,
AP-TTLS/EAP-MD5, EAP-TTLS/EAP-GTC, EAP-TTLS,
EAP-TTLS/EAP-MSCHAPv2, EAP-TTLS/EAP-TLS,
EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP
LAN
Ethernet
10/100 Mbps (RJ45)
Protection
Built-in 1.5 KV magnetic isolation
To Next Page
Loading...
Need help?
General
