NPort W2150/2250 Plus Series User’s Manual Web Console: System Monitoring
9-5
System Monitoring> System Status> Serial Data Log
Data logs for each serial port can be viewed in ASCII or HEX format. After selecting the serial
port and format, you may click Select all to select the entire log if you wish to copy and paste the
contents into a text file. The Clear log and Refresh buttons allow you to clear or refresh the log
contents.
The Serial Data Log page is located under System Status in the System Monitoring folder. This
is where you can download the current data log for a serial port. Select the desired serial port in the
Select port field. Select the desired data format in the Download format field. Click [Clear log]
to clear the log contents.
The data log includes all data sent or received by the specified serial port since the NPort was
powered on. The maximum size of the log is 64 KB.
To Next Page
Loading...
