NPort W2150/2250 Plus Series User’s Manual Web Console: Serial Port Settings
7-36
TCP Port
Default
4001
Options
0 to 9999
Description
This field specifies the TCP port number for reverse terminal sessions.
Authentication Type
Default
None
Options
None, Local, RADIUS
Description
This field specifies the method used to verify a user’s ID and authorization.
None: No authentication is required to open a terminal session.
Local: The user ID and password must match the local user’s table, which is
found under System Management> Misc. Network Settings> User Table.
RADIUS: The user ID and password must be authenticated by the RADIUS
server, which is specified under System Management> Misc. Network Settings>
Authentication Server.
Map Keys <CR-LF>
Default
CR-LF
Options
CR-LF, CR, LF
Description
This field specifies how the ENTER key is mapped from the Ethernet port
through the serial port.
CR-LF: The ENTER key will be mapped to a carriage return + line feed (i.e.,
the cursor will jump to the next line, and return to the first character of the line).
CR: The ENTER key will be mapped to a carriage return only (i.e., the cursor
will return to the first character of the line).
LF: The ENTER key will be mapped to a line feed only (i.e., the cursor will
jump to the next line, but not move horizontally).
To Next Page
Loading...
