NPort W2150/2250 Plus Series User’s Manual Web Console: Network Settings
6-11
In Infrastructure Mode
On the General page, you can configure Profile name, Operation mode, and SSID. Additional
settings are also available depending on whether you select Ad-hoc Mode or Infrastructure Mode.
Profile Name
Default
Ad-hoc (in Ad-hoc Mode)
Profile1, Profile2, or Profile 3 (in Infrastructure Mode)
Options
free text (e.g., “Primary Connection”)
Description
This is a free text field to help you differentiate one profile from another. It does
not affect operation of the NPort.
Profile Enable
Default
Enable
Options
Enable, Disable
Description
This field is for Infrastructure Mode only and specifies whether or not to enable
this profile. You can use this setting to limit which APs the NPort may connect
to.
To Next Page
Loading...
Need help?
General
