NPort W2150/2250 Plus Series User’s Manual Web Console: System Management
8-16
System Management> Maintenance> Firmware
Upgrade
The Firmware Upgrade page is located under Maintenance in the System Management folder.
This is where you can update the NPort firmware. After obtaining the latest firmware from
www.moxa.com, select or browse for the firmware file in the Select firmware file field. Before
clicking [Submit], it is a good idea to save the NPort configuration using the Configuration
Export page, since the firmware upgrade process may cause all settings to revert to factory
defaults.
System Management> Maintenance> Configuration
Import
The Configuration Import page is located under Maintenance in the System Management
folder. This is where you can load a previously saved or exported configuration. Select or browse
for the configuration file in the Select configuration file field. If you also wish to import the IP
configuration (i.e., IP address, netmask, and gateway), make sure that Import all configurations
including IP configurations is checked.
To Next Page
Loading...
Need help?
General
