NPort W2150/2250 Plus Series User’s Manual Installing and Configuring the Software
11-10
4. On the Serial Parameters tab, specify the communication settings that the host will use when
opening the COM port.
5. On the Security tab, select the Enable Data Encryption option to enable data to be encrypted
when transmitted over the COM ports. After selecting the encryption option, select the Keep
connection option to start encrypting COM port communications immediately without
restarting the COM ports. This may speed up opening and closing of the COM port for your
host, but it also causes your host to tie up the NPort serial port so other hosts cannot use it.
6. Click [OK] when you have finished configuring the COM port
To Next Page
Loading...
