NPort W2150/2250 Plus Series User’s Manual Initial IP Configuration
3-4
6. Use the cursor keys to navigate between the different fields. For IP address, Netmask, and
Gateway, enter the desired values directly. For IP configuration and LAN speed, press
ENTER to open a submenu and select between the available options.
7. Press ESC to return to the menu. Press ESC again to return to the main menu. When
prompted, press Y to save the configuration changes.
8. Press R or use the cursor keys to select Restart and press ENTER. Press ENTER again to
select System.
When prompted, press ENTER to proceed. The NPort will reboot with the new IP settings.
To Next Page
Loading...
