MR TAPCON 250 - Page 100

9 Operation
Maschinenfabrik Reinhausen GmbH 2022100 8595028/00 ENTAPCON
®
250
Independent regulation
If the assigned event is active, the device activates the independent regula-
tion independent mode.
Master parallel operation method
If the assigned event is active, the device activates the master parallel oper-
ation method.
Follower parallel operation method
If the assigned event is active, the device activates the follower parallel oper-
ation method.
Automatic tap synchronization parallel operation method
If the assigned event is active, the device activates the automatic tap syn-
chronization parallel operation method.
Parallel operation group1
If the assigned event is active, parallel operation group1 activates.
Parallel operation group2
If the assigned event is active, parallel operation group2 activates.
Target-tap-position operation
If the assigned event is active, the device switches to the defined target tap
position.
Activate desired value 1
If the assigned event is active, the device activates the desired value 1.
Activate desired value 2
If the assigned event is active, the device activates the desired value 2.
Activate desired value 3
If the assigned event is active, the device activates the desired value 3.
Activate desired value 4
If the assigned event is active, the device activates the desired value 4.