MR TAPCON 250 - Page 101

9 Operation
Maschinenfabrik Reinhausen GmbH 2022 1018595028/00 EN TAPCON
®
250
Activate desired value 5
If the assigned event is active, the device activates the desired value 5.
9.1.8.2 Digital inputs
The device features the option of assigning the following functions to the dig-
ital inputs.
Description
I: Desired value setting release If the input is active, the device activates
the release of the desired value.
I: Blocking If the input is active, the device activates
blocking.
I: Autom. tap synchronization If the input is active, the device activates
the input automatic tap synchronization.
I: Desired value 1 If the input is active, the device activates
desired value 1
I: Desired value 2 If the input is active, the device activates
desired value 2.
I: Desired value 3 If the input is active, the device activates
desired value 3
I: Desired value 4 If the input is active, the device activates
desired value 4
I: Desired value 5 If the input is active, the device activates
desired value 5
I: High-speed return If the input is active, the device activates
high-speed return.
I: Follower If the input is active, the device activates
the input parallel operation follower.
I: Independent If the input is active, the device activates
the input parallel operation independent
I: K1 feedback If the input is active, the device activates
the input feedback K1.
I: Master If the input is active, the device activates
the input parallel operation master.
I: Motor-drive unit in operation If the input is active, the device activates
the input motor-drive unit in operation.
I: Motor prot. sw. trigg. If the input is active, the device activates
the input motor protective switch at ca-
pacity.
I: Parallel group 1 If the input is active, the device activates
the input parallel operation group 1.
I: Parallel group 2 If the input is active, the device activates
the input parallel operation group 2.