MR TAPCON 250 - Page 104

9 Operation
Maschinenfabrik Reinhausen GmbH 2022104 8595028/00 ENTAPCON
®
250
Description
O: Bandwidth > If a signal is present at the input, the de-
vice activates the function bandwidth
value below limit.
O: Desired value 1 If a signal is present at the input, the de-
vice activates desired value 1.
O: Desired value 2 If a signal is present at the input, the de-
vice activates desired value 2.
O: Desired value 3 If a signal is present at the input, the de-
vice activates desired value 3.
O: Desired value 4 If a signal is present at the input, the de-
vice activates desired value 4.
O: Desired value 5 If a signal is present at the input, the de-
vice activates desired value 5.
O: Function monitoring If a signal is present at the input, the de-
vice activates function monitoring.
O: Collective error If a signal is present at the input, the de-
vice activates the event active function.
O: Undercurrent If a signal is present at the input, the de-
vice activates undercurrent blocking.
O: Overcurrent If a signal is present at the input, the de-
vice activates overcurrent blocking.
O: Undervoltage If a signal is present at the input, the de-
vice activates undervoltage blocking.
O: Overvoltage If a signal is present at the input, the de-
vice activates overvoltage blocking.
O: Motor runtime exceeded If a signal is present at the input, the de-
vice activates the function motor runtime
value above limit.
O: Parallel error If a signal is present at the input, the de-
vice activates the function parallel opera-
tion error.
O: Follower If a signal is present at the input, the de-
vice activates the function assign fol-
lower.
O: Independent If a signal is present at the input, the de-
vice activates the function assign inde-
pendent.
O: Master If a signal is present at the input, the de-
vice activates the function assign master.
O: Motor protective switch (pulse) If a signal is present at the input, the de-
vice activates the motor protective
switch.