Muton XPJ-1641SR - Page 118

118 Head cleaning
1. Performing Head cleaning
[1]
Tap .
[2]
Use or to choose the cleaning mode.
Tap [Enter].
• The printer will start cleaning.
[3]
Run a nozzle check.
2. Performing Nozzle check
[1]
Load a roll media to print the nozzle check pattern.
"Loading a roll media" P. 22
[2]
Tap .
[3]
Tap [Enter].
• The printer will print the nozzle check pattern.
Clean Print Head?
Short
Clean Print Head?
Normal
Clean Print Head?
Long
Print Nozzle Check?
Start -> Enter