Muton XPJ-1641SR - Page 162

162 List of specifications
Environmental conditions Printer Operation
Environment
Temperature 20 to 32 °C, humidity 40 to 60%
No condensation
Recommended Printing
Environment
Temperature 22 to 30 °C, humidity 40 to 60%
No condensation
Change rate Temperature: No more than 2 °C per 1 hour
Humidity: No more than 5% per 1 hour
Printer Storage Environment Storage without ink charging: up to 6 months
Temperature -20 to +60 °C, humidity 20 to 80%
No condensation
Storage with ink charging: up to 1 week
Temperature -10 to 40 °C, humidity 20 to 60%
No condensation
Storageupto4daysmaximumwhenstoredbetween32
℃to40 ℃ .
Ink Storage Environment • Black/Cyan/Magenta/Yellow/Light Cyan/Light Magenta/
Light Black/ (1,000 ml each)
Temperature -20 to 40 °C
Humidity: No condensation
• Cleaning bag (300 ml)
Temperature -5 to 40 °C
Humidity: up to 80%, No condensation
Storageupto6monthsmaximumwhenstored
between-5 ℃to5 ℃ or30 ℃to40 ℃ .
Power supply
specifications
Printer Voltage: AC 100V to AC 120V ±10% / AC 200V to 240V ±10%
Frequency: 50/ 60Hz ±1Hz
Capacity:
AC 100V to AC 120V: No less than 9 A
AC 200V to AC 240V: No less than 6 A
Heater Voltage: AC 100V to AC 120V ±10% / AC 200V to 240V ±10%
Frequency: 50/ 60Hz ±1Hz
Capacity:
AC 100V to AC 120V: No less than 10 A
AC 200V to AC 240V: No less than 5 A
Power consumption Power off AC100V to 120V, 1.0 W or below
AC200V to 240V, 3.8 W or below
Standby 45 W or below
Sleep Mode AC100V to 120V, 30W or below
Operation • Printer:
1100 W or below
•Heater:
1200W or below
Current consumption 100V to 120V • Printer: 9 A or below
• Heater: 10 A or below
200V to 240V • Printer: 6 A or below
• Heater: 5 A or below