Muton XPJ-1641SR - Page 62

62 Setup 1: User Type
Details of print mode (XPJ-1682SR)
Effect
Print Mode Resolution Pass
(4-color
setting)
Pass
(7-color
setting)
Direction Default effect
settings
Quality 1 1440 × 1440 16 pass 32 pass Uni (unidirectional) Fine&Fog
Quality 2 1440 × 1440 16 pass 32 pass Bi (bidirectional) Fine&Fog
Quality 3 720 × 1440 8 pass 16 pass Uni (unidirectional) Fine&Fog
Quality 4 720 × 1440 8 pass 16 pass Bi (bidirectional) Fine&Fog
Graphics 1 720 × 1080 6 pass 12 pass Uni (unidirectional) Fine&Fog
Graphics 2 720 × 1080 6 pass 12 pass Bi (bidirectional) Fine&Fog
Banner 1 720 × 720 4 pass 8 pass Uni (unidirectional) Fine&Fog
Banner 2 720 × 720 4 pass 8 pass Bi (bidirectional) Fine&Fog
Banner 3 360 × 720 2 pass 4 pass Uni (unidirectional) None
Banner 4 360 × 720 2 pass 4 pass Bi (bidirectional) None
Select an effect setting.
Set up this menu when you want to improve print quality by adjusting the set
print mode.
Setting values
The Effect function is not used.
The printing joint will be the wave form.
The printing joint will shade off.
（XPJ-1641SR Only）
The printing joint will shade off as the
wave form. This is the default effect
setting on XPJ-1641SR.
The printing joint will shade off.
This is the default effect setting on XPJ-
1682SR.
Performs “Wave” printing using the left
side of the of Print head.
Performs “Wave” printing using the right
side of the of Print head.
Edges between each pass are barely
noticeable and more seamless (XPJ-1682SR
Only).
Mode: Quality 1
1440 x 1440 16pass Uni
** : Effect :
None
** : Effect :
Wave
** : Effect :
Fog
** : Effect :
Fine & Fuzz
** : Effect :
Fine & Fog
** : Effect :
A - S Fine & Wave
** : Effect :
B - S Fine & Wave
** : Effect :
   i-WeaveEX