. . . . .
PROGRAMMABLE KEYS
Speed Dial and Programmable Keys
DT820 Phone User Guide 7 -85
in the Speed Dial Key Entry screen if you want to keep the Personal Directory
entry information for a Speed Dial.
1 Enter the programmable mode for your phone. The Feature key LED lights a steady red.
Note:
For information on how to enter the programmable mode for your phone, see
“Using the Feature Key” on page 7 -64.
2 Do one of the following:
ITY-6D Phones:
• Press the programmable key that you want to set as a Speed Dial Key. The
programmable key LED flashes.
ITY-8LD and ITY-8LCGX Phones:
• Press the Scroll Key to scroll to the desired page, then press the Speed Dial Key that you
want to edit. The programmable key LED flashes, and the Speed Dial information for the
key is shown.
3 Press the Edt softkey.
4 Select 3 Speed Dial.
5 Press the Delete softkey to delete the Speed Dial Key number and then press the OK
softkey.
6 Press the Save softkey to save the entry.
The entry will be deleted as a Speed Dial, but the Personal Directory information will
not be deleted.
7 Press Enter b on the cursor pad or the OK softkey.
Note:
For Speed Dial entries that are set as read-only by your system administrator,
an error is displayed and the entry is not deleted.
8 Do one of the following:
• To delete more Speed Dial entries, press the Speed Dial Key for that entry and
repeat steps 3 through 7.
• To return to the main phone screen, press the Exit softkey or the Feature Key.
If you go to the Personal Directory, you will still see the name and number as an entry,
but if you view the details for the entry, you will see that the Speed Dial has been
deleted and the Monitor setting is now “None.”
To delete an entire Speed Dial and Personal Directory entry
1 Press the Menu key.
2 Select 1 Personal Directory.
3 Use the cursor pad or the Up and Down softkeys to scroll to the entry you want to
delete.
4 Press the More softkey and then the Delete softkey.
5 Press the Enter b on the cursor pad or the OK softkey to confirm.
The entry will be deleted from your Personal Directory.
6 Press Enter b on the cursor pad or the OK softkey to return to the Personal Directory.
Note:
For Directory entries that are set as read-only by your system administrator, an
error is displayed and the entry is not deleted.
To Next Page
Loading...
Need help?
General
