DT820 COLOR MICROBROWSER AND ENHANCED PROGRAMMABLE KEYS
Enhanced Programmable Keys
9 -148 DT700 Phone User Guide
HANDSET FORWARDING LEDS AND ICONS
Table 9.6 Handset Forwarding LEDs and Icons
To set Forwarding for your phone
1 While the LED for the Forwarding key is not lit , press the Forwarding key.
The Handset Forwarding page from the phone microbrowser is opened.
2 Use the phone keypad and the microbrowser soft keys to configure the handset
forwarding conditions for your phone.
To disable Forwarding for your phone
1 While the LED for the Forwarding key is red , press the Forwarding key.
The Handset Call Forwarding page from the phone microbrowser is opened.
2 Select Clear forwarding.
The phone clears your handset forwarding settings.
Note: When Forwarding is disabled, the phone may continue to play the stutter dial
tone (if configured on your system) depending on the state of Message
Waiting Indicator (MWI) and Call Forwarding features.
LED
Call Control
Home Screen
Comments
LED is not
lit
No Icon No Handset Forwarding settings are enabled on the phone.
Red Immediate Handset Forwarding is enabled.
While your phone is set to Immediate Handset Forwarding, your
phone will also play a stutter dial tone.
Note: Handset Forwarding may have been enabled through the
Forwarding key, through the star codes, or using a supported
client application.
Red Busy Handset Forwarding is enabled.
Note: Handset Forwarding may have been enabled through the
Forwarding key, through the star codes, or using a supported
client application.
Red No Answer Handset Forwarding is enabled.
Note: Handset Forwarding may have been enabled through the
Forwarding key, through the star codes, or using a supported
client application.
To Next Page
Loading...
Need help?
General
