. . . . .
PROGRAMMABLE KEYS
Speed Dial and Programmable Keys
DT820 Phone User Guide 7 -71
Table 7.2 Monitor Presence Icons
You can also press the Cancel softkey to return to the previous screen.
7 Select 2 Show in Directory and press the OK softkey.
You can also press the Cancel softkey to return to the previous screen.
8 Press the Save softkey to save your changes.
If the Speed Dial number is already used for another entry, you will see an error when
you try to save the entry.
To change the Speed Dial Key number for the entry, select 3 Speed Dial and enter a
new Speed Dial Key number.
9 A confirmation displays, telling you the speed dial has been updated. Press Enter b on
the cursor pad or the OK softkey.
10 To return to the main phone screen, press the Exit softkey or the Feature Key.
To add a Programmable Key as a Speed Dial Key
with a Personal Directory Entry from the Personal Directory
1 Press the Menu key or cursor pad to access the Personal Directory.
2 Press the More softkey, and then the Add softkey.
3 Use the telephone keypad to enter the name and press Enter b on the cursor pad or the
OK softkey.
Up to 24 characters may be entered for the name.
Type Status Icon
Line Key Registered
Unregistered
Speed Dial Key
(No Monitoring)
Not Available
BLF Idle
Ringing (SIP@Net)
Ringing (3C system)
Subscription Failed
Online (3C system)
(Phone is Online)
On the Phone
(Phone is in use)
Held (3C system)
Busy
To Next Page
Loading...
Need help?
General
