PROGRAMMABLE KEYS
Speed Dial and Programmable Keys
7 -86 DT820 Phone User Guide
If you go to the Personal Directory, you will still see that the entire entry has been
deleted.
To delete a Speed Dial only entry
For Speed Dial entries that do not have a Personal Directory entry, you can delete the
Speed Dial entry.
1 Enter the programmable mode for your phone. The Feature key LED lights a steady red.
2 Do one of the following:
ITY-6D Phones:
• Press the programmable key that you want to set as a Speed Dial Key. The
programmable key LED flashes.
ITY-8LD and ITY-8LCGX Phones:
• Press the Scroll Key to scroll to the desired page, then press the Speed Dial Key that you
want to edit. The programmable key LED flashes, and the Speed Dial information for the
key is shown.
3 Press the Delete softkey.
4 Press the Enter b on the cursor pad or the OK softkey to confirm.
The entry will be deleted as a Speed Dial.
5 Press Enter b on the cursor pad or the OK softkey.
Note:
For Speed Dial entries that are set as read-only by your system administrator,
an error is displayed and the entry is not deleted.
6 Do one of the following:
• To delete more Speed Dial entries, press the Speed Dial Key for that entry and
repeat steps 3 through 5.
• To return to the main phone screen, press the Exit softkey or the Feature Key.
To Next Page
Loading...
Need help?
General
