. . . . .
BASIC SETTINGS/CONFIGURATION
Basic Setup with the Menus and Cursor Pad
DT820 Phone User Guide 4 -35
3 Select 1 Ringtone.
4 Select 1 Internal Ringtone.
By default, your current internal ringtone is selected.
Use the
and keys to scroll through the list of ringtones.
To listen to the ringtone, scroll to that selection. A single loop sample of the ringtone is
played.
Note: The phone only plays the ringtone if it is in the idle state. If the phone receives
an incoming call or event related to a soft ring, when it is playing this ringtone,
it stops playing the ringtone and plays the ringtone currently configured for the
received event.
To stop playing a ringtone and listen to another ringtone, use the
and keys to
scroll to another ringtone.
To select a new ringtone, scroll to the ringotne or press the number for that ringtone,
then press the OK soft key or the ENTER key b. If you select a new ringtone, this
ringtone will be applied to your next incoming call.
To exit the menu without making any changes to your current ringtone, press the
Cancel soft key.
Note: If a ringtone label shows a “*” character at the end of the file name, the file is
specified in your phone configuration file, but the file itself could not be
downloaded from the boot server. If you select this entry, it will not be saved
and your ringtone settings will not change.
To select an External Ringtone
1 Press the Menu key.
2 Select 3 User Settings.
3 Select 1 Ringtone.
4 Select 2 External Ringtone.
By default, your current external ringtone is selected.
Use the and keys to scroll through the list of ringtones, or use the phone keypad
to select a specific ringtone.
To listen to the ringtone, scroll to that selection. A single loop sample of the ringtone is
played.
Note: The phone only plays the ringtone if it is in the idle state. If the phone receives
an incoming call or event related to a soft ring, when it is playing this ringtone,
it stops playing the ringtone and plays the ringtone currently configure for the
received event.
To stop playing a ringtone and listen to another ringtone, use the and keys to
scroll to another ringtone, or use the phone keypad to select a specific ringtone.
To select a new ringtone, scroll to the ringotne or press the number for that ringtone,
then press the OK soft key or the ENTER key b. If you select a new ringtone, this
ringtone will be applied to your next incoming call.
To exit the menu without making any changes to your current ringtone, press the
Cancel soft key.
Note: If a ringtone label shows a “*” character at the end of the file name, the file is
specified in your phone configuration file, but the file itself could not be
To Next Page
Loading...
Need help?
General
