1. System BIOS
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
67
Chapter 2 Useful Features
(5) Storage Configuration submenu
On Advanced, choose Storage Configuration and then press <Enter> key to display the menu screen shown
below. For the menu that has on the left, move the cursor to it and then press <Enter> key to show its
submenus.
Option Parameter Description
SATA Information
−
This option is not displayed when SATA Mode
is RAID Mode.
SATA Mode
Disabled
[IDE Mode]
AHCI Mode
RAID Mode
Specifies SATA Mode.
For the models that show RAID Mode, this
option is only for display.
Hard Disk Drive Pre-Delay
[Disable]
3 Seconds
6 Seconds
9 Seconds
12 Seconds
15 Seconds
21 Seconds
30 Seconds
Specifies delay time before HDD is accessed
during POST.
[ ]: Factory setting
Note
NEC has not verified AHCI driver support.
To Next Page
Loading...
Need help?
General