NEC iLO 5 User Manual

210
• Click Administration in the navigation tree, and then click the Language tab. Click a
language in the Installed Languages list.
Configuring the default language settings
Use this procedure to configure the default language for the users of this instance of the iLO
firmware.
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Administration in the navigation tree, and then click the Language tab.
2. Select a value in the Default Language menu.
The available languages are English and any other language for which a language pack is
installed.
3. Click Apply.
iLO notifies you that the default language was changed.
In subsequent iLO web interface sessions, if there is no browser cookie from a previous
session, and the browser or OS language is not supported, the iLO web interface uses the
configured default language.
Configuring the current iLO web interface session language
Procedure
1. Click Administration in the navigation tree, and then click the Language tab.
2. Click the name of a language in the Installed Languages list.
The iLO web interface for the current browser session changes to the selected language.
Uninstalling a language pack
Prerequisites
Configure iLO Settings privilege

NEC iLO 5 Specifications

General

Brand	NEC
Model	iLO 5
Category	Server
Language	English