224
Authentication Failure Logging
Enables you to configure logging criteria for failed authentications. The following settings are
valid:
• Enabled-Every Failure—A failed login log entry is recorded after every failed login
attempt.
• Enabled-Every 2nd Failure—A failed login log entry is recorded after every second failed
login attempt.
• Enabled-Every 3rd Failure (default)—A failed login log entry is recorded after every third
failed login attempt.
• Enabled-Every 5th Failure—A failed login log entry is recorded after every fifth failed
login attempt.
• Disabled—No failed login log entry is recorded.
Authentication Failure Delay Time
Enables you to configure the duration of the iLO login delay after a failed login attempt. The
following values are valid: 2, 5, 10, and 30 seconds.
The default value is 10 seconds.
Authentication Failures Before Delay
Enables you to configure the number of failed login attempts that are allowed before iLO
imposes a login delay. The following values are valid: 1, 3, 5, or every failed login attempt.
The default setting is 1, which means that a login delay is not imposed until the second failed
login attempt.
To Next Page
Loading...
