NEC iLO 5 User Manual

265
Trap
number
Trap name
Description
6037
cpqHe3FltTolFanRedundancyLost
The fault-tolerant fans have lost
redundancy.
6038
cpqHe3FltTolFanInserted
A fault-tolerant fan has been inserted.
6039
cpqHe3FltTolFanRemoved
A fault-tolerant fan has been removed.
6040
cpqHe3TemperatureFailed
Temperature exceeded on the server.
6041
cpqHe3TemperatureDegraded
The temperature status has been set to
Degraded, and the temperature is
outside the normal operating range.
Depending on the system
configuration, this system might be
shut down.
6042
cpqHe3TemperatureOk
The temperature status has been set to
OK.
6048
cpqHe4FltTolPowerSupplyOk
The fault-tolerant power supply
condition has been reset to OK.
6049
cpqHe4FltTolPowerSupplyDegraded
The fault-tolerant power supply
condition has been set to Degraded.
6050
cpqHe4FltTolPowerSupplyFailed
The fault-tolerant power supply
condition has been set to Failed.
6051
cpqHeResilientMemMirroredMemoryEngaged
The Advanced Memory Protection
subsystem has detected a memory
fault. Mirrored Memory has been
activated.
6054
cpqHe3FltTolPowerRedundancyRestore
The fault-tolerant power supplies have
returned to a redundant state.
6055
cpqHe3FltTolFanRedundancyRestored
The fault-tolerant fans have returned to
a redundant state.
6061
cpqHeManagementProcInReset
The management processor is
resetting.
6062
cpqHeManagementProcReady
The management processor is ready.
6064
cpqHe5CorrMemReplaceMemModule
Memory errors have been corrected.
Replace the memory module.
6069
cpqHe4FltTolPowerSupplyACpowerloss
The fault-tolerant power supply in the
specified chassis and bay reported AC
power loss.
Table Continued

NEC iLO 5 Specifications

General

Brand	NEC
Model	iLO 5
Category	Server
Language	English