40
• Company name
This information is not written to the log data stored on the server.
4. Click Download Entire Log.
5. Save the file.
Clearing the Active Health System Log
If the log file is corrupted, or if you want to clear and restart logging, use the following
procedure to clear the Active Health System Log.
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Information in the navigation tree, and then click the Active Health System Log tab.
The Active Health System Log is inaccessible when it is being used by EXPRESSBUILDER, the
Active Health System download CLI tool, or the iLO Service Port.
2. Click Show Advanced Settings.
3. Scroll to the Clear Log section, and then click Clear.
4. When prompted to confirm the request, click OK.
iLO notifies you that the log is being cleared.
5. Reset iLO.
Resetting iLO is required because some Active Health System data is recorded to the log
only during iLO startup. Performing this step ensures that a complete set of data is available
in the log.
6. Reboot the server.
Rebooting the server is required because some information, such as the operating system
name and version, is logged at server startup. Performing this step ensures that a complete
set of data is available in the log.
To Next Page
Loading...
Need help?
General