NEC iLO 5 User Manual

60
• Status
• Serial Number
• Model
• Media Type
• Capacity
• Location
• Firmware Version
• Drive Configuration
• Encryption Status
Direct-attached storage details
Controllers
This section provides the following information about the NEC Corporation and third-party
storage controllers that manage direct-attached storage.
• Controller location
• Top-level controller status—The top-level controller status (displayed on the left of the
controller location) is a combination of the controller hardware status and the status of the
enclosures, physical drives, and spare drives associated with the controller. If the controller
hardware status is OK, and any associated hardware has a failure, the top-level controller
status changes to Major Warning or Degraded, depending on the failure type. If the
controller hardware has a Failed status, the top-level controller status is Failed.
• Controller Status—Controller hardware status (OK or Failed)
• Serial Number
• Model
• Firmware Version
• Controller Type
Physical Drives
This section provides information about physical drives attached to NEC Corporation and third-
party storage controllers.
When a physical drive has a Failed status, this status does not affect the overall storage health
status. Only logical drives affect the storage health status.
• Physical drive location
• Status
• Serial Number
• Model
• Media Type
• Capacity
• Location
• Firmware Version
• Drive Configuration
• Encryption Status

NEC iLO 5 Specifications

General

Brand	NEC
Model	iLO 5
Category	Server
Language	English